Table of Contents
Advertisement
SPECIFICATIONS
Input Connections
Output Connections
Input Impedance
Output Impedance
Maximum Input Level
Maximum Output Level
Phantom Power
Maximum Gain
Signal to Noise Ratio
THD
Equalizer Range
Bluetooth
Power Requirements
Dimensions (HWD)
Weight
ART maintains a policy of constant product improvement. ART reserves the right to make changes in
design, or make additions to, or improvements upon, this product without any obligation to install same
on products previously manufactured. Therefore, specifications are subject to change without notice.
XLR-F balanced (3), ¼-inch unbalanced (2), RCA (6),
1/8-inch balanced (1)
¼-inch TRS balanced (2), ¼-inch unbalanced (1), RCA (2)
600/22K Ohms Mic/Line XLR inputs, 10K Ohms RCA inputs,
22K Ohms ¼-inch EFX Returns
50 Ohms ¼-inch Main outputs, 1K Ohms RCA Record outputs,
100 Ohms EFX output
-10dBu/+20dBu Mic/Line XLR inputs, +20dBu RCA line inputs,
+20dBu EFX inputs
+24dBu balanced Main outputs, +20dBu RCA Record outputs,
+20dBu EFX output
+15 Volts DC, regulated low noise
56dB/26dB Mic/Line, 26dB RCA inputs
>90dB typical
<1% typical
+/-12dB @ 100Hz & 10KHz
v5.0, up to 30M range, Class 2 device
USA: 105 to 125 VAC / 50-60Hz, 15 Watts typical. Export units
configured for country of destination
1.75-inch x 19.0-inch x 6.0-inch
5mm x 483mm x 152mm
6.2 lbs. (2.8kg)
Note: 0 dBu = 0.775Vrms
6
Advertisement
Table of Contents
