Specifications - Art MX822 User Manual

SPECIFICATIONS

Input Connections
Output Connections
Input Impedance
Output Impedance
Frequency Response
THD
Phase Response
Signal to Noise Ratio
Equivalent Input Noise
Maximum Input Level
Maximum Output Level
Maximum Gain
Phantom Power
Chassis Type
Power Requirements
Dimensions (HWD)
Weight
ART maintains a policy of constant product improvement. Therefore, specifications are subject to
change without notice.
XLR female balanced (MIC)
1/4" TS unbalanced (CH 1-8, Effects Return)
1/4" TRS stereo unbalanced (EFX BUS IN, Main Expand)
XLR male balanced (Main)
1/4" TS unbalanced (Effects Send)
1/4" TRS stereo unbalanced (Monitor, Main Expand, Headphone)
1k Ohms (MIC), 5k Ohms (CH 1-8)
<1k Ohms (Main, balanced), <25 Ohms (Headphone)
20 Hz – 20 kHz (+0, -1 dB) (CH 1-8 in, Main out)
<0.01% @ 1 kHz
All connections are phase coherent
>90dB typical (Ref 0dBu)
-120dBu typical (XLR balanced, max gain), -100dBu typical (1/4")
-19dBu (MIC), +24dBu (CH 1-8)
+24dBu (Main), +18dBu (Monitor, Effects Send)
+60dB (MIC), +14dB (CH 1-8)
Switch selectable, +48V DC, filtered, current limited
All steel black finish
USA: 95-125 VAC, 50-60 Hz, <15W
Export units configured for country of destination
1.75" x 19" x 6"
44.5mm x 483mm x 152mm
6.5 lbs. (2.95 kg)
Note: 0 dBu = 0.775Vrms
11