Programming System Functions Via Computer; Pc Accessibility - Vodavi MiniVoice User Manual

Programming System Functions Via Computer

Programming System Functions Via Computer

PC Accessibility

Cable Connection -- The cable between the
a NULL MODEM arrangement with a 9-pin female connector on each end.
Desktop or Laptop -- Programming is accomplished through the use of a
laptop or standard PC desktop system. No special software is required. Any
communications package that supports ANSI terminal emulation will work.
The required port speed and protocol is 9600 BAUD, N-8-1.
If HyperTerminal is the communications package to be used, perform the
following steps before programming:
1. Select Start > Programs > Accessories > Communications >
2. Setup a new connection using the following settings:
3. The HyperTerminal connection is now configured properly for
4. Exit HyperTerminal, then re-start the program.
5. After connected to the MiniVoice, press ESC to access the Main
Lift the cover of the unit to access the programming port.
After connecting the cable to the PC, plug the other end into the
programming port on the
HyperTerminal.
a. Select COM1 or COM2, as required by your PC, then press OK
b. On the Comport Settings screen, set 9600, N 8 1, Flow Control to XON,
XOFF.
c. Click OK.
d. Click on File > Properties, then select the Settings tab.
e. Select Auto Detect as the emulation.
f. Click on the ASCII setup button and uncheck the "Wrap lines that
exceed terminal width" option.
g. Click OK, then click OK again.
programming the MiniVoice.
Programming Menu.
MiniVoice
MiniVoice unit.
unit and the PC must be
1-29