Table of Contents
Advertisement
1-12
Other Vodavi Systems
Perform the following steps to configure Vodavi systems, other than the DHS,
with the
1. On the single line telephone ports that are to be assigned to the VM
2. Enter the VM group programming for VM group 1 (440). Flash 65,
3. Enter the single line telephone ports into a VM group (440-447). Flash 65,
4. Enter the desired Leave and Retrieve Tables for the VM group. Flash 65,
Note that Steps 5 and 6 are accomplished in the Flash 66 programming field.
These steps should be completed by default.
5. Leave Table Programming:
MiniVoice
system.
group, disable the conference feature. Flash 50, XXX-XXX, Button #3,
where XXX-XXX are the SLT extension range numbers to be assigned to
the VM group.
Button #1. This button should be lit for Steps 3-4.
Button #12. Enter [1] to add or [0] to delete (FP3 or newer).
Buttons #10 and #11. Program the Leave Table as Table 0 and the Retrieve
Table as Table 1.
a. Press Button #1 (Table 0).
b. Enter a [0] + [TRANS] + [ ] on the keypad, where:
0 indicates a prefix digit.
The [TRANS] button represents a pause based on the system
pause timer.
The
is used to activate a mailbox and prepare it to accept a new
message.
c. Press the [HOLD] button to update.
Voice Mail Integration Programming
Advertisement
Table of Contents
