Advertisement
DRTCC – Tank full model
Connection diagram:
Methods of programming the device:
Step 1: Switch on the device using power ON/OFF switch. There will be a power ON delay of 6 second
and the LCD display segments shows the company name RMG AUTOMATION on the first line and the
model number in the second line as below.
Step 2: So the above display changes to the below Home Screen with Date and Day on the First Line;
Time and Status on the Second line as below.
Step 3: The Status Bar displays the Motor ON/OFF status; AUTO/MANUAL mode status and TANK
FULL/EMPTY status.
Step 4: Press SET Key. It displays as
asking for the password. But by default the
password set would be 0000. Hence you can press the SET key once again to enter into the settings.
There are totally four settings.
Use NEXT key to select the preferred settings.
Web: www.rmgautomation.com
eMail: rmgworld@hotmail.com
Contact: 044 - 43180017
2
Advertisement
