Table of Contents
Advertisement
Low-pressure dry, clean air
6.
Allow the Printhead to dry, ensuring that the slot in the charge electrode is clear of Cleaning
Solvent.
7.
Refit the Printhead cover and tighten the thumbscrew.
PERSONAL INJURY: Make sure the Printhead is completely dry before attempting to
start the Jet. Use lint-free cloths or low-pressure dry clean air to dry the Printhead. Do
not use high-pressure air or cloths or paper towels containing lint waste.
Version 2.0
ci5000 Series Printer Operation Guide
Nozzle
Plate
Charge
Electrode
Phase
Detector
HV Plates
Gutter
Block
5-3
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the ci5000 Series and is the answer not in the manual?