Mechanical Adjustment Procedures - Panasonic AG-513F Service Manual

perform "TAPE INTERCHANGEABILITY ADJUSTMENT" in

MECHANICAL ADJUSTMENT procedures.

3. In early units, a washer is used.
When servicing the washer or the P5 Arm Unit, replace only the
P5 Arm Unit with a new one, and remove the washer.
4. Main Cam Gear is supplied as a Main Cam Gear Kit (Ref. No. 8)
only. Main Cam Gear Kit consists of a Main Cam Gear and a Main
Cam Push Nut. However, Main Cam Push Nut is available
separately as a replacement part.
5. The Capstan Motor Ass'y (Ref. No. 46) is supplied as a unit only.
However, the Flat Flexible Cable (Ref. No. 45) is available
separately as a replacement part.
6. The Infrared Remote Control Unit (Ref. No. 123) replacement part
is available as a complete assembly unit only. Do not try to
disassemble the Infrared Remote Control Unit. However, the
battery cover is available separately as a replacement part.
7. Main Cam Push Nut (Ref. No. 414) is not reusable.
If removed, install a new one.
12.1.3. Electrical Replacement Notes
1. Unless otherwise specified;
All resistors are in
2. Abbreviation
RTL:
Retention Time Limited
This indicates that the retention time is limited for this item. After
the discontinuation of this item in production, it will no longer be
available.
NR:
Non Repairable Board Ass'y
MGF CHIP:
Metal Glaze Film Chip
C CHIP:
Ceramic Chip
, K = 1,000 , M = 1,000 k .
80