Table of Contents
Advertisement
6.2.12.1. Reassembly Notes
1. Installation/Alignment of Intermediate Gear A, Lift Gear and P5
Arm Unit
A. Rotate the Lift Gear so that Hole A on Lift Gear is a Through
Hole with a hole on chassis.
B. Install the Intermediate Gear A so that the hole on Intermediate
Gear A is aligned with the hole on Lift Gear.
C. Install the P5 Arm Unit so that it contacts with the tab of
chassis.
2. Drive Rack Arm Kit
A. Drive Rack Arm is supplied as a Drive Rack Arm Kit only.
3. Installation of Opener Piece
A. Install the Opener Piece so that the slot of the Opener Piece is
inserted to the Pin of Pinch Arm Unit
6.2.13. Motor Block Unit, Audio Control Head Unit, Lift Gear, Tension Arm Boss,
and Cleaner Arm Unit
Fig. J10-2
Fig. J10-3
42
Advertisement
Table of Contents
