Table of Contents
Advertisement
B. Install the Mechanism Chassis and Cassette Up Ass'y straight
onto the TV/VCR Main C.B.A. so that the Sensor LED clears the
hole in the Mechanism Chassis and that 3 Connectors (P6201,
P3001 and P4001) are aligned and seated securely.
5. Installation of Cassette Up Ass'y
A. Confirm that the Locking Tab under the Cassette Up Ass'y is in
Hole on the Mechanism Chassis when installing the Cassette
Up Ass'y. Then, slide the Cassette Up Ass'y towards the back.
B. When installing 2 Screws (449), slide the Holder Unit (Refer to "
WHEN LOADING WITHOUT A
tighten screws. Then, slide it back to the EJECT Position.
C. Hook Spring to the Drive Rack Arm on the Mechanism Chassis.
6.2. MECHANISM SECTION
6.2.1. Disassembly/Reassembly Method
CASSETTE" in Service Notes) to
29
Advertisement
Table of Contents
