Picture Adjustment (Color, Tint, Bright, Picture, Sharpness, Reset) - Panasonic Omnivision PV-M1346 Operating Instructions Manual

M check list before you begin
O All connections are made.
(see page 5.)
L] Your Combination VCR is plugged in.
Picture Adjustment
4D c 7 Push MENU to
С) display the menu
MENU screen.
Rotate and push the
WHEEL to first,
select "TV" and then,
to select VIDEO
ADJUST.
CAPTION ON MUTE:CAP C3
INPL ELECT : TUNER
VIOEO ADJUST
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END : PUSH MENU KEY
Rotate and push the
WHEEL to select
= and display the
... desired video adjust
overlay.
SELECT :
SET
PICTURE
SHARPNESS ----l---
NORMAL
ROTATE WHEEL
: PUSH WHEEL
: PUSH MENU KEY
(See description below.) [END
Rotate the WHEEL to adjust
and push to set the control.
* Repeat steps 3 and 4 to adjust
tue the picture as necessary.
wf araua S — — Push MENU three times
С) toexit this mode.
MENS e If no button is pushed within 5 minutes, the video
-— 7 adjust overlay disappears.
• Adjustment scale and setting indicator number are
displayed to assist you.
To Reset Picture Controls to the Factory Setting
Rotate and push the WHEEL to select and
set NORMAL.
All controls return to factory settings.
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END : PUSH MENU KEY
Picture Adjust
32 SHARP
ИНИНИ
ADJUST : ROTATE WHEEL
ROTATE WHEEL
ADJUST : ROTATE WHEEL
SET L
the picture by adjusting
contrast and color level
at the same time and in
the proper balance.
of the picture.
of the colors.
10