Table of Contents
Advertisement
4. Press and hold STOP, PLAY, and VOL- buttons on the unit
together over 5 seconds again or press the POWER button OFF to
release EVR Adjustment mode.
The Default value will be written to Memory IC (IC6004).
5. Perform all EVR Adjustments. (Refer to
Register) ADJUSTMENT WITH THE REMOTE
ELECTRICAL ADJUSTMENT
in ADJUSTMENT PROCEDURES.)
5.1.9. METHOD FOR LOADING/UNLOADING OF MECHANISM
5.1.9.1. (Manual Method)
Turn the Loading Gear clockwise (for loading) or counterclockwise (for unloading) using
needlenose pliers etc.
Note:
Do not use this method if Mechanism is jammed or locked.
"EVR (Electronic Variable
Fig. 6-1
15
CONTROL" of
Advertisement
Table of Contents
