Daikin FWW Series Technical Manual page 18

Chilled water fan coil units
Hide thumbs Also See for FWW Series:
Table of Contents

Advertisement

Drain Test
• Connect the main drain pipe to the flexible drain.
• Feed water from flexible drain hose to check the piping for leakage.
• When the test is completed, connect the flexible drain hose to the drain connector on the indoor unit.
NOTE
This Indoor Unit uses a drain pump for condensed water drainage. Install the unit horizontally to prevent
water leakage or condensation around the air outlet.
Model: FWC-C
The indoor unit must be installed such that there is no short circuit of the cool discharge. Respect the
installation clearance. Do not put the indoor unit where there is direct sunlight on unit. The location is suitable
for piping and drainage and it must have a large distance between a door and unit.
Ceiling Concealed Mounting
• Use the hanger supplied with the unit.
• Make sure that the ceiling is sufficiently strong to withstand the weight.
Insulation material
( eld supply)
Air outlet side
Aluminium tape
( eld supply)
Provide clearance for servicing ease and optimal air flow as shown in the diagram.
14
Feed Water
Flexible Drain Hose
See
Detail A
Air inlet side
Aluminium tape
( eld supply)
* Can be smaller than 300mm if ceiling is removable.
Main Drain Pipe
Tighten
Detail A
300mm
or more
300mm* or more
Ceiling
2300mm or more
Application Information
Field supply
Washer for hanger bracket
(attached)
Floor

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents