Program Mode - Hyundai H-1415 Instruction Manual

While playing MP3 MODE:
Press PLAY MODE button once for single track repeat playing.
Press PLAY MODE twice for track inside the album repeat playing.
Press PLAY MODE three times for all tracks repeat playing.
Press PLAY MODE four times for playing randomly.
Press PLAY MODE five times for normal playing

Program mode

Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before use, press the STOP/FOLDER
button.
Press the PROGRAM button. "PROG" symbol is flashing on the display.
Select a desired track by using the
Press PROGRAM button to confirm. "P02" on the display shows you that you now may store track2.
Repeat steps described above to enter additional memories into the program if necessary.
When all the desired tracks have been programmed, press PLAY/PAUSE button to play the disc in the order you have programmed.
Notes:
You can erase the contents of the memory by:
- opening the CD door
- selecting RADIO source
- pressing STOP/FOLDER button twice during playback or in the stop position.
Good quality sound is guaranteed only when playing licensed CDR/CDRW discs.
MP3 operation
Set FUNCTION switch to CD/USB/SD position. Press CD/USB/SD button once to activate CD mode, twice to activate SD mode, three times for USB.
Open the CD door by pressing on the "PUSH OPEN" field. Put a MP3 into the CD compartment with the label side upwards and close the CD door.
In MP3 playback mode all functions are available as in CD operation mode.
Note: Good quality sound is guaranteed only when playing licensed MP3 discs.
USB / SD flash memory playback
Slide the FUNCTION selector to CD/USB/SD position.
Press and hold the PLAY/PAUSE button for 2 sec.
Plug in USB Memory Stick into USB Port or insert a SD or MMC card with label facing up into the card slot.
The display will show either USB or SD and total track number.
or buttons.
5