Page 1
Massage Mat User Manual Model No.: CF-3703 Rev 2 Note: The specifications and/or components of this appliance are subject to change without prior notice.
Warnings ................3 Important Safeguards ............3 Components ..............6 Features ................7 Operation Procedure ............7 Power supply ..............7 Massager Controller ............8 Cleaning the Massager ..........10 Completion and Storage ..........11 Troubleshooting ............. 12 Warranty Against Defect ..........13 READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Page 2 of 13...
1 Warnings Before using this appliance, read and follow all warnings and instructions in this manual, even if you are familiar with this product. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Page 4
Do not place this unit on other appliances, on uneven surfaces or where it could be subject to heat sources (e.g., radiators or stoves), direct sunlight, excessive dust. This Appliance should not be placed near a hot gas or electrical burner or placed in a heated oven.
Page 5
The unattended use of heat by children or incapacitated persons may be dangerous. This product is Not to be used by very young children (0-3 years) Children under the age of three are not to use this appliance due to their inability to react to overheating.
3 Components Massage Mat Massage Zone “Leg” Massage Zone “Neck” Heat Zone Massage Zone “Back” Power Supply: ZD012M120100AU Massage Zone “Thigh” Controller Page 6 of 13...
5.2 Massager Controller Note: When first turned on, the controller will default to Mode 1. You can then change the Mode or operate the massage zones manually. 1. Massage Zone Indicator Lights. These light up depending on the massage zone selected.
Page 9
Press again and the controller will turn Off and go into standby. The indicator light will turn off. 7. Mode Button (5 Modes): With the Controller switched on and the On / Off button pressed the Massager will start in default Mode 1 and Medium Intensity. The “M1”...
8. Intensity Button: With the Controller switched on, press this button and the Massager will change intensity. The default Intensity when first turned on is “Medium”. The indicator light “M” will illuminate indicating it is on Medium Intensity. Press this button again, and the massage intensity will decrease to Low intensity indicated by the indicator light changing to “L”.
7 Completion and Storage After you have finished using the massager, if need be, clean it as • described under the Cleaning section, then store it safely in its box and in a dry place. Do Not wind the power supply cord around the massager or power •...
8 Troubleshooting Problem Cause Remedy Plug in power supply and Switch On at power point. If still no power, check the power point power supplied Power Not Switched On. checking with another appliance such as a table lamp. If no power to the power point, call Power.
9 Warranty Against Defect 12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.
Need help?
Do you have a question about the CF-3703 and is the answer not in the manual?
Questions and answers