Configuring The System - ADC HiGain H4TU-C-388 List 5A User Manual

LTPH-UM-1252-01

Configuring the System

The Config menu (see
•
Standard options (see
•
ADC options (see
•
Date and time (see
•
Master clear (see
•
Reset to factory default configuration (see
Making Changes to Standard and ADC Options
Figure 7 on page 14 and
are those supported by HiGain HDSL4 units when connected to units from other vendors. ADC options are an
extended set of options that are only available when using HiGain units exclusively.
Table 5 on page 15 and
option. The settings in bold type are the factory default settings.
To make changes to these options:
1 Press C to select the Config menu.
2 Use the ↑ and ↓
3 Use the arrow keys to select an option.
SPACEBAR
4 Press the
ENTER
5 Press to activate your choice.
H4TU-C-388 List 5A
Figure 6) allows you to make the following changes:
Figure 7 on page 14).
Figure 8 on page 14).
"Setting Date and Time" on page
"Clearing the History, Alarm, and Event Log Screens" on page
"Resetting to Factory Defaults" on page
Figure 6. Config Menu
Figure 8 on page 14 show the Standard and ADC configuration options. Standard options
Table 6 on page 16 describe the Config menu options and the available settings for each
arrow keys to select Standard Options or ADC Options, then press
to cycle through the settings for that option.
October 15, 2003
11).
Provisioning
20).
19).
ENTER
.
13