Page 1
AD-170 Service Manual Phase 5 Microprocessor Controls Timer Controls American Dryer Corporation...
Page 2
WARNING:UNDER NO CIRCUMSTANCES should the door switch or the heat circuit devices ever be disabled WARNING:The dryer must never be operated with any of the back guards, outer tops, or service panels removed. PERSONAL INJURY or FIRE COULD RESULT. Important AD-170 DATE OF PURCHASE MODEL NO. DISTRIBUTORS NAME Serial Number(s)
Page 3
https://appliancetechmanuals.com IMPORTANT YOU MUST DISCONNECT and LOCKOUT THE ELECTRIC SUPPLY and THE GAS SUPPLY or THE STEAM SUPPLY BEFORE ANY COVERS or GUARDS ARE REMOVED FROM THE MACHINE TO ALLOW ACCESS FOR CLEANING, ADJUSTING, INSTALLATION, or TESTING OF ANY EQUIPMENT per OSHA STANDARDS.
Page 4
https://appliancetechmanuals.com FOR YOUR SAFETY DO NOT DO NOT DO NOT IMPORTANT PLEASE OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment and/or specified in the installation/operator's manual included with the dryer. must not...
Page 5
https://appliancetechmanuals.com Table of Contents SECTION I Important Information ............................. SECTION II Maintenance ............................... SECTION III Installation Requirements ..........................SECTION IV Desciption of Parts .............................
Page 6
https://appliancetechmanuals.com SECTION V Servicing ................................SECTION VI Troubleshooting ............................... SECTION VII Electrical Troubleshooting ..........................SECTION VIII Technical Information .............................
Page 7
https://appliancetechmanuals.com SECTION I A. Safety Precautions DO NOT should be must be WARNING: DO NOT WARNING: DO NOT WARNING: DO NOT WARNING: DO NOT should be WARNING: must be WARNING: SHOULD NOT BE SHOULD BE...
Page 8
https://appliancetechmanuals.com SECTION II A. Cleaning should be WARNING: SUGGESTED INTERVAL FUNCTION WARNING: IMPORTANT: VOID THE MANUFACTURER'S WARRANTY...
Page 9
https://appliancetechmanuals.com WARNING: B. Adjustments SUGGESTED INTERVAL FUNCTION should be should be C. Lubrication...
Page 10
https://appliancetechmanuals.com SECTION III should be A. Enclosure, Air Supply, and Exhaust Requirements NOTE: should be should be should be must be IMPORTANT: must be should be CAUTION: IMPROPERLY SIZED OR INSTALLED EXHAUST DUCT WORK CAN CREATE A POTENTIAL FIRE HAZARD.
Page 11
https://appliancetechmanuals.com B. Electrical and Gas Requirements IMPORTANT: must meet must be NOTE: must be NOTE: must be C. Operational Service Check Procedure should be...
Page 12
https://appliancetechmanuals.com SECTION IV A. Computer Panel Assembly B. Control Box C. DSI Module...
Page 13
https://appliancetechmanuals.com D. Gas Burner Assembly E. Drive Motor F. Blower Motor and Impellor G. Blower Motor and Impellor...
Page 14
https://appliancetechmanuals.com NOTE: should be H. Idler Assembly I. Tumbler Bearing and Pulley Arrangement J. Basket...
Page 15
https://appliancetechmanuals.com K. Main Door Switch L. Sail Switch M. Hi-Limit...
Page 16
https://appliancetechmanuals.com N. Automatic Reset Thermostat O. Lint Drawer must be P. Lint Drawer Switch should never Q. Steam Damper System...
Page 17
https://appliancetechmanuals.com SECTION V should be WARNING: PERSONAL INJURY COULD RESULT should not be should be CAUTION:...
Page 18
https://appliancetechmanuals.com A. Computer Controls must be NOTE:...
Page 19
https://appliancetechmanuals.com NOTE: DO NOT NOTE:...
Page 20
https://appliancetechmanuals.com B. Ignition Controls NOTE: should be...
Page 39
https://appliancetechmanuals.com K. Impellor L. Lint Drawer Assembly...
Page 40
https://appliancetechmanuals.com SECTION VI ELECTRICAL PARTS SHOULD ALWAYS BE CHECKED FOR FAILURE BEFORE BEING RETURNED TO THE FACTORY. OBSERVE ALL SAFETY PRECAUTIONS DISPLAYED ON THE EQUIPMENT OR SPECIFIED IN THIS MANUAL WHILE MAKING REPAIRS.
Page 45
https://appliancetechmanuals.com SECTION VII ELECTRICAL PARTS SHOULD ALWAYS BE CHECKED FOR FAILURE BEFORE BEING RETURNED TO THE FACTORY. OBSERVE ALL SAFETY PRECAUTIONS DISPLAYED ON THE EQUIPMENT OR SPECIFIED IN THIS MANUAL WHILE MAKING REPAIRS.
Page 46
https://appliancetechmanuals.com A. Phase 5 OPL System Diagnostics door dSFL IMPORTANT: DO NOT NOTE: SEFL nSEn...
Page 47
https://appliancetechmanuals.com B. LED Display Indicators HEAT...
Need help?
Do you have a question about the AD-170 and is the answer not in the manual?
Questions and answers