Using The Performance Screens To View Performance Data; Performance History At The Ds1 Interface - ADC HiGain H4TU-C-388 List 5A User Manual

Monitoring System Activity and Performance
U P
SING THE ERFORMANCE
The Performance screens display:
•
CRC statistics for the HDSL4 or DS1 interface in 31-day, 48-hour, 25-hour, and current history reports.
•
Alarm statistics for the DS1 interfaces
(Figure 23 on page
To access the Performance history screens:
1 Press P to select the Performance screen.
2 Press SPACEBAR
H4DU-1 NET HDSL, H4DU-1 CPE HDSL, H4DU-2 NET HDSL, H4DU-2 CPE HDSL, or
H4TU-R HDSL), then press
SPACEBAR
3 Press
History, or 31-Day History), then press

Performance History at the DS1 Interface

The Performance History for the DS1 Interface provides a 31-day, 48-hour, 25-hour, and current statistics screens
for the H4TU-C and H4TU-R (as viewed from the H4TU-C). To gain access to the Blockage Indicator History
screen, you must be logged on remotely. See
page for logon procedures.
Figure 12 below and Figure 14 on page 25
Figure 13 on page 25 is an example of DS1 performance history screen at the line unit. Refer to
for descriptions of the errors reported on DS1 interface screens. Asterisks indicate performance monitoring from
the previous day.
Figure 15 on page 26
unit, respectively. These screens report 1-day, 1-hour, and 15-minute statistics.
24
S
CREENS TO
(Figure 21 on page 31
33) on a continuous basis.
to select either interface (H4TU-C DS1, H4TU-R DS1, H4TU-C HDSL,
ENTER
.
to select the type of statistics (Current, Alarm History, 25-Hour History, 48-Hour
ENTER

"Using the Performance Screens to View Performance Data"

are examples of DS1 performance history screens at the remote unit.
and Figure 16 on page 26
Figure 12. H4TU-R DS1 31-Day Performance History
October 15, 2003
V P
IEW
and Figure 22 on page
.
show statistics for the DS1 interface at the remote unit and line
LTPH-UM-1252-01
D
ERFORMANCE
31) or HDSL4 interfaces
Table 9 on page 27
H4TU-C-388 List 5A
ATA
on this