Event Log Messages - ADC HiGain H4TU-C-388 List 5A User Manual

LTPH-UM-1252-01

Event Log Messages

Table 13 lists all the possible messages that can be displayed by the System Event Log screen.
Any DS1 Alarm History reset
Any DS1 PM register reset
Any HDSL4 Alarm History reset
Any HDSL4 PM register reset
Any Loop Down (any segment)
Any Loop Up (any segment)
Any provisioning option change: <provisioning mnemonic>: changed from <old> to <new>
CPE DBER alarm (1-day threshold crossed of any PM data except PRM-NE or PRM-FE)
CPE DS1 AIS begins/ends
CPE DS1 LOS begins/ends
CPE PRM-NE BER alarm (at the remote only: 1-day threshold crossed of PRM-NE: trouble on CPE receive)
Current statistics reset
Event Log reset
H4TU-C Power up/down
H4TU-R Power up/down
HDSL4 DC pair open begins/ends on any segment
HDSL4 Ground fault begins/ends on any segment
HDSL4 HBER alarm (threshold crossed) on any segment.
HDSL4 loop attenuation (threshold crossed) on any HDSL4 interface
HDSL4 margin alarm (threshold crossed) on any HDSL4 interface
HDSL4 unavailability begins/ends on any segment
Master zero reset
NTWK DBER alarm (1-day threshold crossed of any PM data)
NTWK DS1 LOS begins/ends
NTWK PRM-FE BER alarm (at the remote only: 1-day threshold crossed of PRM-FE: trouble on NTWK far end)
NTWK DS1 AIS begins/ends
Power Feed Open begins/ends
Power Feed Short begins/ends
RAI begins/ends
TX RAI-CI begins/ends (RAI-CI sent from the remote towards the network)
H4TU-C-388 List 5A
Table 13. Event Log Entry Messages
October 15, 2003
Monitoring System Activity and Performance
35