Advertisement
Mode name
AV4(V) /
Set input to AV4 (V) and set
AV1(RGB) I/O
output to AV1 (RGB) for I/O
Setting
checking
AV2(Y/C) / AV1(V) I
Set input to AV2 (Y/C) and set
/O Setting
output to AV1 (V) for I/O checking
AV2(V) / AV1(Y/C) I
Set input to AV2 (V) and set
/O Setting
output to AV1 (Y/C) for I/O
checking
AV2(RGB) /
Set input to AV2(RGB) and set
AV1(V) I/O Setting
output to AV1(V) for I/O checking
P50(H) Output
Timer Microprocessor IC7501-83
output High signal for AV1-pin 10
passing through inverter
(approx. 0V DC at AV1-pin 10).
P50(L) Output
Timer Microprocessor IC7501-83
output Low signal for AV1-pin 10
passing through inverter
(approx. 4.4V DC at AV1-pin 10).
Tray OPEN/
The RAM drive tray is opened
CLOSE Test
and closed repeatedly.
Error code
Initialization of the last error
initialization
code held by timer (Write in F00)
Item
Description
FL display
When OK.
When NG.
When OK.
When NG.
"*" is number of open/
close cycle times.
26
Key operation
(Remote controller
Press [8] [0] in service
mode.
Press [8] [1] in service
mode.
Press [8] [2] in service
mode.
Press [8] [3] in service
mode.
Press [8] [4] in service
mode.
Press [8] [5] in service
mode.
Press [9] [1] in service
mode
*When releasing
mode, press the
button of Remote
Controller more
seconds.
Press [9] [8] in service
mode.
Advertisement
