Advertisement
7.2. When the Forcible Disc Eject can not be done.
1. Turn off the power and pull out AC cord.
2. Remove the Top Case.
3. Remove the Front Panel.
4. Remove 4 screws and Upper Base Unit from DVD-RAM Drive.
5. Take out the disc and put the Opener Roller on fully position for
direction of Arrow.
6. Put the Upper Base Unit so that the Opener Roller is inserted into
the groove.
7. Check Opener Roller is seen through the Opener position
Checking Hole, and tighten 4 screws.
10
Advertisement
