ABB Ability Cassia X1000 Installation Manual page 5

- Mobile network needs to have adequate signal strength. In the most demanding
locations,
modem/dongle.
Power supply:
- In case PoE network is not available, a PoE injector (power supply) is needed.
- PoE is 802.3af/at compliant.
- Recommended PoEs:
Ethernet cable:
- 1 CAT6 shielded Ethernet cable (RJ45), with a length of 50 meters maximum, is
needed for PoE, while WIFI or mobile network is
- 2 CAT6 shielded Ethernet cables (RJ45), with a length of 50 meters maximum, are
needed when LAN/Ethernet network is used.
Computer:
- A computer with WIFI adapter is needed for gateway configuration. A tablet
computer or mobile phone can also be used.
- Google Chrome web browser is recommended to be used.
USB Cellular Modem / Dongle
- The gateway has built in drivers for several USB dongles. For the list of supported
dongles please check the section 2.7 USB mobile dongle connection .
- A SIM card with Internet data plan.
- The gateway also supports the use of any USB powered WIFI modems.
Mounting:
Flat head screwdriver for pole mounting.
-
Phillips head screwdriver and a drill (if needed) for wall mounting.
-
Mounting is not mandatory, but it is recommended to secure the gateway
-
somehow to its intended place.
DOCUMENT ID
9AKK107046A4620
© Copyright 2021 ABB. All rights reserved.
an extension USB cable or external antenna might be needed for the USB
Procet PT-PSE104GO-30-5, Indoor PoE Injector
o
Procet PT-PSE108GBR-OT, Outdoor PoE Injector
o
REV.
L
AB B ABI LIT Y™ SM ART S ENSO R BLU ETOOTH ® G AT EWAY
used.
DATE
August 2022
LANG. PAGE
EN 5/29