ABB Ability Cassia X1000 Installation Manual page 22

Connection to Access Controller can be verified with Debug Tools in Other tab:
To check the connection to the Access Controller, select NetCat, add Address
-
gw.smartsensor.abb.com (or gw.smartsensor.abb.com.cn in case of China), Pro-
tocol TCP, Timeout 2, Port 443 and press Start.
Wait for the black screen with the result to appear below.
-
- If you receive a message containing the text "... 8883 (?) open", the gateway sta-
tus should be properly sent to the AC.
DOCUMENT ID
9AKK107046A4620
© Copyright 2021 ABB. All rights reserved.
Figure 16 Test connection to Access Controller
REV.
L
AB B ABI LIT Y™ SM ART S ENSO R BLU ETOOTH ® G AT EWAY
DATE
August 2022
LANG. PAGE
EN 22/29