Environmental Characteristics; Physical Characteristics - Holux GR-82 User Manual

Gps engine board
Hide thumbs Also See for GR-82:
Table of Contents

Advertisement

GPS
Product series
3.1.7 RF interface
1). Antenna connector type: MCX, MMCX or SMA, 2.8 VDC output. (optional output
VCC_IN)
2). Minimum signal tracked: -159 dBm. (based on SiRF GSC3f spec.)
3). Active antenna
3.1.8 Serial Port
1). Two full duplex serial communication, RS232 or CMOS 3V interface, with user
selectable baud rate (4800-Default, 9600, 19200, 38400).
2). Simple and straightforward connection to PC.
3). NMEA 0183 Version 2.2 ASCII output (GGA, GSA, GSV, RMC (VTG , GLL and ZDA for
optional)).
4). DGPS protocol RTCM SC-104 message types 1, 2 and 9 or WAAS (in USA area) or
EGNOS (in European area)
5). SiRF binary-position, velocity, altitude, status output.
3.1.9 TIMEMARK-1PPS Pulse
1). Level CMOS 3V.
2). Pulse duration 1 microsecond.
3). Time reference At the pulse positive edge.
4). Measurements Aligned to GPS second,

3.2 Environmental Characteristics

1). Operating temperature range -10 to +60 degree C.
2). Storage temperature range -20 to +70 degree C.
.

3.3 Physical Characteristics

1) Active Size: 40(W) x 50(L) x 13.5(H) (mm) (height of connector included)
2) Weight: 9 g.
3) Connector 20-pin straight male header, 2 mm pitch.
HOLUX Technology, Inc.
1F, No.30, R&D Road, Hsinchu 300, Taiwan (Hsinchu Science Industrial Park)
TEL: 886-3-6687000 FAX:886-3-6687111 E-mail:info@holux.com.tw Website:www.holux.com.tw
With HOLUX, You never lose the way!
1 microsecond.
±
6

Advertisement

Table of Contents
loading

Table of Contents