Rtcm Received Data - Holux GR-82 User Manual

Gps engine board

Hide thumbs Also See for GR-82:

Table of Contents

GPS

Product series

Message ID

UTC Time

Day

Month

Year

Local zone hour

Checksum

4.2 RTCM Received Data

The default communication parameters for DGPS Input are 9600 baud, 8 data bits, stop bit,

and no parity. Position accuracy of less than 5 meters can be achieved with the GR-82 by using

Differential GPS (DGPS) real-time pseudo-range correction data in RTCM SC-104 format, with

message types 1,2, or 9. As using DGPS receiver with different communication parameters,

GR-82 may decode the data correctly to generate accurate messages and save them in

battery-back SRAM for later computing.

HOLUX Technology, Inc.

1F, No.30, R&D Road, Hsinchu 300, Taiwan (Hsinchu Science Industrial Park)

TEL: 886-3-6687000 FAX:886-3-6687111 E-mail:info@holux.com.tw Website:www.holux.com.tw

$GPZDA

181813

2003

knots

With HOLUX, You never lose the way!

ZDA protocol header

Either using valid IONO/UTC or

estimated from default leap seconds

01 TO 31

01 TO 12

1980 to 2079

Offset from UTC (set to 00)

End of message termination

Table of Contents