2-5. TUNER STEP mode (E2 / E3 only)
2-5.1. Actions
This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.
2-5.2. Starting up
While holding down buttons "ZONE2 SOURCE" and "STATUS" simultaneously, press the power button to turn on the
power.
Select the "5. TUNER FRQ SER" using the "TUNER PRESET CH+/-" button, then press the "STATUS" button to confirm.
2-5.3. Displays
Start up this unit in TUNER STEP mode, select the desired option using the "TUNER PRESET CH+/-" button, then enter
using the "STATUS" button.
The following information is displayed in the following order.
(a) AM9 kHz / FM50 kHz is selected
L1
T u n e r F R Q
FLD
L2
A M 9 /
L3
"TUNER PRESET CH+"
(b) AM10 kHz / FM200 kHz is selected
L1
T u n e r F R Q
FLD
L2
A M 1 0 /
L3
(c) Press the power button to turn off the power.
(d) Press the power button to turn on the power.
F M 5 0
"TUNER PRESET CH-"
F M 2 0 0
"STATUS"
69