Installing the Antenna
Follow these steps to install the antenna on a suspended ceiling track.
Determine the location you wish to mount the antenna.
Step 1
Loosen the hex nut on the ceiling track bracket.
Step 2
Position the bracket on the ceiling track. See Figure 1.
Step 3
Figure 1
Squeeze the bracket firmly onto the ceiling track.
Step 4
Use a 7/16 inch (11.1 millimeter) wrench to tighten the hex nut. Do not overtighten.
Step 5
Carefully screw the antenna onto the bracket's threaded stud until it is hand tight. See Figure 2.
Step 6
Figure 2
78-14721-02
Positioning the Ceiling Track Bracket
Attaching the Antenna
Cisco Aironet High Gain Omnidirectional Ceiling Mount Antenna (AIR-ANT1728)
3