Table of Contents
Advertisement
Installation and Operation Manual
Integrated Message Server, IMS/IP-WiFi
2
Installation (ELISE2)
This chapter is a complement to Installation Guide, ELISE2, TD 92232GB.
Figure 2. Board description with components described in this chapter.
2.1
Description of LED Indications
There are a number of LEDs on ELISE that indicate the status of the software, see
These status indications are software dependent and are described in this chapter. For
information regarding indications by other LEDs, see the ELISE2 Installation Guide.
LED #
LED5
LED2
2.2
Internal Inputs and Outputs
The IMS/IP has two internal inputs and two open-collector outputs (J16, see
above), that can be used by the Basic Alarm Manager.
See chapter
Alarm Manager, and the ELISE2 Installation Guide for information about how to connect
inputs and outputs.
2007-06-26/ Ver. D
IC1
J22
1
IC24
J9
J11
J12
S3
4
1
2
J6
J14
LED6
LED7
J7
J8
J20
1
4
1
J5
LED status
Indication
ON
The IMS/IP applications are up and running.
OFF
Problems when starting the applications, check the log
files on the IMS/IP Administration web page for more
information.
ON
Paging waiting in queue to A-bus
OFF
No paging in queue to A-bus
6 Basic Alarm Manager
SW4
LED1
J1
SW2
BAT1
SW3
6
J2
J16
5
1
J10
J16
J15
J4
J11
J12
J13
4
1
2
1
2
S4
J6
J14
J24
S5
S1
S2
on page 11, for more information about the Basic
TD 92322GB
figure
2.
figure 2
3
Advertisement
Table of Contents
