Table of Contents
Advertisement
TIMER RECORDING
AUTOMATIC TIMER RECORDING
You may set the VCR to start and end a recording while you are away. You can set seven programs to
record on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE:
SETTING TIME:
CHANNEL:
TAPE SPEED:
PROGRAM NO:
· Please refer to the connection you are using, through pages 10, 11, or 12 on "ANTENNA/CABLE
CONNECTIONS" before continuing.
•Use the remote control for this procedure.
• Be sure to check that the "PWR." and the "VCR" indicators are both on to program it.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR
to match the channel selected on the TV.
.
• Clock must be set to the correct time and date before setting the timer.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
Avoid overlap of programs ...
There is a case that a program will not be performed.
When programs overlap:
• The program with an earlier start time has priority.
• Once the earlier program finishes, the overlapping programs will begin recording in sequence.
• The illustration below demonstrates the sequence of recordings.
1 Select "TIMER PROGRAMMING"
First, press the MENU button until the main menu appears.
Next, press the PLAY/
F.FWD/
button.
TIMER PROGRAMMING
AUTO REPEAT
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
NOTE: If you have not yet set the clock, "CLOCK SET" appears. If so, continue with step [3] on page 16
or 17. Then, set the timer recording.
May 4th, 2000
from 7:30PM to 8:30PM
CH16
SP
No. 1
or STOP/
button to point to "TIMER PROGRAMMING". Then press the
MENU
Advertisement
Table of Contents
