Table of Contents
Advertisement
ON SCREEN DISPLAY
NOTE: VCR power and the "VCR" indicator must be on.
• To check the Count, Clock and Channel number, press the DISPLAY button on the remote control.
Each time you press the DISPLAY button , TV screen will change as shown below.
• It is normal for the status display (STOP, PLAY etc.) and the tape speed display (SP, LP, (playback only),
or SLP) to disappear after 5 seconds.
DIGITAL DISPLAY.
1. PWR. (power) indicator- Lights up when the power is turned on.
2.
indicator- Lights up when a timer recording or an IRT has been set. Flashes if a tape is not inserted
in the VCR even if you set a timer.
3. Cassette indicator- Lights up when there is a tape in the VCR.
4. VCR indicator- Indicates that the VCR is in the VCR position.
5. REC indicator- Lights up when the VCR is in the Recording mode. Flashes when a recording has been
paused.
6. Clock/Feature/Channel/Speed indicator- Indicates the current time (when the clock is set), and briefly
displays which feature the VCR is currently performing as the illustration. Indicates the channel number
(when it is set). Indicates the tape speed (when it is changed).
SPECIAL FEATURES
.
REAL TIME TAPE COUNTER
• This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time
will not change during blank portions on the tape.)
• The "-" indication will appear when the tape is rewound further than "0:00:00" on the tape counter.
--0:00:12
AUTO REWIND
When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically
rewind to the beginning. After rewinding finishes, the VCR will eject the tape and turn itself to off.
• The tape will not auto-rewind during timer recording or Instant Recording Timer.
• When the Counter Memory is activated, the tape will rewind to the M0:00:00 and the VCR will go into
the Stop mode.
Advertisement
Table of Contents
