Recording Hints - Hitachi VT-MX6500A Owner's Manual

Fig. 3: VHF/UHF Separate Antenna
You can record one channel while viewing another. The same goes for Automatic Timer Recording and
IRT. For details, please refer to "Recording" on page 27.
Fig. 4: Cable Box and Satellite Box
You can ONLY record and view the SAME channel when using this connection. There are no exceptions.
The same goes for Automatic Timer Recording and IRT.
Note: Channel memory programming is NOT needed when using this connection.

RECORDING HINTS

1 ) Be sure to check that the "PWR." and the "VCR" indicators are both on.
2) Turn on the TV and Cable Box or Satellite Box.
3) Set the channel to be recorded on the Cable Box or Satellite Box.
4) Set the TV and VCR to channel 3 or 4.
5) Set the CH3/CH4 switch on the back of the VCR to match the channel set on the TV and VCR.
6) Press the REC button. For AUTOMATIC TIMER RECORDING, the VCR must stay on channel 3 or 4
at step [9] on page 30.
Continued on the next page.