Table of Contents
Advertisement
+100 button- When selecting cable channels which are higher than 99, press this button first, then press the
last two digits. (To select channel 125, first press "+100" button then press "2" and "5"). (only on the
remote control)
ENTER- For details, see pages 34-35. (only on the remote control)
12. TAPE SPEED button- Press to choose the desired recording speed : SP/SLP. (only on the remote
control)
13. MENU button- Press to display the menu on the TV screen. Press to exit the menu on the TV screen.
(only on the remote control)
14. DISPLAY button- Press to display the counter or the current channel number and the current time on
the TV screen. (only on the remote control)
15. QUICK-FIND button- Quick Find mode. For more information, please read page 26. (only on the
remote control)
16. COUNTER RESET button- Press to reset counter to 0:00:00. (only on the remote control)
EXIT button- Press to exit the menu on the TV screen. (only on the remote control)
17. COUNTER MEMORY button- Press to set counter memory on and off. (only on the remote control).
18. INDEX SEARCH button- Index Search mode. For more information, please read page 25. (only on
the remote control)
19. TIME SEARCH button- Time Search mode. For more information, please read page 26. (only on the
remote control)
20. PAUSE button- Press to temporarily stop the tape during recording or to view a still picture during
playback. (only on the remote control)
Frame Advance function- Press to advance the picture by one frame at a time during the still mode. (only
on the remote control)
21. SLOW button- Press to start slow motion playback. The slow speed can be controlled by pressing the
F.FWD button (faster) or the REW button (slower). (only on the remote control)
22. MUTE button- Press to mute the TV's sound. Press it again to resume the sound. (only on the remote
control)
23. VOL(ume) buttons- Press to adjust the desired TV's volume level by using either
or
button.
(only on the remote control)
24.VCR/TV button- Press to select TV or VCR mode. (only on the remote control)
VCR position: to view playback, to monitor video recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view one program while recording another.
25. MODE SELECT buttons- (only on the remote control)
• CATV button- For details, see page 34.
• TV button- For details, see page 35.
• VCR button- For details, see page 34-35.
26. Power cord- Connect to a standard AC outlet (120V/60Hz)
27. AUDIO OUT jack- Connect to the audio input jack of your audio equipment or another VCR
28. AUDIO IN jack- Connect to the audio output jack of your audio equipment or another VCR.
29. ANT. IN terminal- Connect to an antenna, Cable system or Satellite system.
30. VIDEO OUT jack- Connect to the video input jack of your video camera or another VCR.
31. VIDEO IN jack- Connect to the video output jack of your video camera or another VCR.
32. CH3/CH4 selector switch- Use to select a video output channel (3 or 4) for VCR playback.
33. ANT. OUT terminal- Connects to the antenna input terminal on your TV.
Advertisement
Table of Contents
