Table of Contents
Advertisement
OPERATION
1.
Position Support Handle (A) in
comfortable operating position
and tighten wing nut (B). The
cutting attachment should be
5 cm to 7.5 cm (2 in. to 3 in.)
above the ground and as level
as possible.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS po-
sition unit so that exhaust is directed away from your face and
body.
Operation of this equipment may create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.
18
A
B
© 10/2017 ECHO Inc.
GT-225I
X7732274600
Advertisement
Table of Contents
