Table of Contents
Advertisement
OPERATION
DO NOT allow flames or sparks near fuel.
◆
Fuel tanks/cans may be under pressure. Always loosen
◆
fuel caps slowly allowing pressure to equalize.
NEVER refuel a unit when the engine is HOT or RUNNING!
◆
DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks
◆
outdoors over bare ground.
DO NOT overfill fuel tank. Wipe up spills immediately.
◆
Securely tighten fuel tank cap and close fuel container
◆
after refueling.
Inspect for fuel leakage. If fuel leakage is found, do not
◆
start or operate unit until leakage is repaired.
Move at least 3 m (10 ft.) from refueling location before
◆
starting the engine.
Mixing Instructions
1.
Fill an approved fuel container
with half of the required
amount of gasoline.
2.
Add the proper amount of
2-stroke oil to gasoline.
3.
Close container and shake to
mix oil with gasoline.
4.
Add remaining gasoline, close
fuel container, and remix.
Spilled fuel is a leading cause of hydrocarbon emissions. Some
states may require the use of automatic fuel shut-off containers to
reduce fuel spillage.
• Empty the fuel tank prior to storing the unit. Return
unused fuel to an approved fuel storage container.
Storage - Fuel storage laws vary by locality. Contact your
local government for the laws affecting your area. As a
precaution, store fuel in an approved, airtight container.
Store in a well-ventilated, unoccupied building, away from
sparks and flames.
Stored fuel ages. Do not mix more fuel than you expect to use in thirty
(30) days, ninety (90) days when a fuel stabilizer is added.
20
Fuel to Oil Mix – 50:1 Ratio
US
Gas
Oil
gal.
fl.oz.
1
2.6
2
5.2
5
13
© 10/2017 ECHO Inc.
GT-225I
Metric
Gas
Oil
L
cc
5
100
10
200
25
500
X7732274600
Advertisement
Table of Contents
