Easy Installation - IBM Deskstar 14GXP Installation Manual

Step 7: Replace the cover on your computer
With the cables connected properly and the drive mounted securely, replace the cover on the computer.
Step 8: Connect all cables and plug the power cord into the wall.
Step 9A: Easy Installation
When you purchased this drive from IBM, you received a copy of Ontrack® Disk Manager software. This
software is necessary if your BIOS does not support drives over 8.4 GB. There are also limitations at 4.2
GB and 2.1 GB. This easy installation will use the Disk Manager diskette to partition and format your drive.
If the easy installation does not work, or you choose not to use Disk Manager, continue to Custom
Installation on page 15.
Boot Computer
"Booting" means turning on your computer. Turn on your computer after you have inserted the Ontrack®
Disk Manager diskette. The following screen shots are examples and may not appear the same on your
system.
A large blue IBM screen will appear after several seconds and then the following screen.
Select Easy Disk Installation. The following screen will appear.
Page 12
IBM
Disk Manager
Select an Installation Option
(E)asy Disk Installation
(A)dvanced Disk Installation
(M)aintenance Menu
(U)pgrade Disk Manager
(V)iew/Pring Online Manual
Exit Disk Manager
Version 3.0
Version 9.42.02