Utilities; Drive Copy - IBM Deskstar 14GXP Installation Manual

Utilities

Your Deskstar drive comes low-level formatted and free of defects. NOTE: DO NOT ATTEMPT TO LOW
LEVEL FORMAT AN IDE DRIVE. In the rare case where data needs to be removed from the drive, there
are 2 utilities available from the HDDTech FTP site at: http://index.storsys.ibm.com/hddtech
.
ZAP: Zap is a utility that will 'zap' your boot sector by writing 0's to the first 128 sectors of your drive.
WIPE: Wipe goes one step further and writes 0's to the entire drive.
These utilities should be sufficient to return your drive to factory shipped condition.

Drive Copy

(Copy data from your old drive to your new drive)
If you are replacing an older smaller hard drive with the Deskstar drive, you may want to copy all your files
from the smaller drive to the new drive. There are several software programs available that copy one drive
to another.
Power Quest (www.powerquest.com/product/dc.index.html) Drive Copy 2.0. Supports all operating
systems, has mouse support, selective partitioning, selective sector copying, and automatically creates
new DOS reboot disk. Not limited by drive size.
Quarter Deck Systems (www.qdeck.com/qdeck/products/diskclone/indexreg.html) Disk Clone. Supports
all operating systems, has mouse support.
ITS Systems (www.itechs-systems.com/) Transfer EZ. For use only with Windows® 3.1 and Windows®
95.
Image Systems Solutions (www.img-systems.com/d2ddesc.htm) Drive to Drive. For use with all operating
systems, but limited to copying only drives with similar physical geometry.
FWB software (www.FWB.com/) Drive Up. For Windows® OS only. Came out in March of this year.
Page 25 Version 3.0