Yamaha TRICITY 2016 Operating Manual page 23

TIP
This fuel meter is equipped with a self-
diagnosis system. If a problem is de-
tected in an electrical circuit, all the dis-
play segments and fuel level warning
indicator start flashing. If this occurs,
have a Yamaha dealer check the elec-
trical circuit.
Clock
1
1. Clock
To set the clock:
1. Push the "SELECT" button and
"RESET" button together for at
two seconds, the hour digits will
start flashing.
2. Push the "RESET" button to set
the hours.
Instrument and control functions
3. Push the "SELECT" button, and
the minute digits will start flashing.
4. Push the "RESET" button to set
the minute digits.
5. Push the "SELECT" button and
then release it to start the clock.
Outside air temperature display
"OUT TEMP"
1. Outside air temperature display
This display shows the outside air tem-
perature from –10 °C to 40 °C in 1 °C
increments. The temperature dis-
played may vary from the actual out-
side air temperature.
3-7
TIP
 If the outside air temperature falls
below –10 °C, a lower temperature
than –10 °C will not be displayed.
 If the outside air temperature
climbs above 40 °C, a higher tem-
perature than 40 °C will not be dis-
played.
 The accuracy of the temperature
reading may be affected when rid-
ing slowly (under 20 km/h [13
mi/h]) or when stopped at traffic
signals, railroad crossings, etc.
Odometer and tripmeter modes
1
1. Odometer/tripmeters
The odometer shows the total distance
traveled by the vehicle.
3
1