Operation And Important Riding Points; Starting The Engine - Yamaha TRICITY 2016 Operating Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

Operation and important riding points

EAU15952
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. To start the engine after a
EWA10272
turnover, be sure to turn the main
switch to "OFF" and then to "ON". Fail-
ing to do so will prevent the engine
from starting even though the engine
will crank when pushing the start
switch.
EAU45311

Starting the engine

NOTICE
See page 5-4 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the side-
stand must be up.
See page 3-18 for more information.
1. Turn the key to "ON".
NOTICE
If a warning light does not come on
initially when the key is turned to
"ON", or if a warning light remains
on, see page 3-3 for the correspond-
ing warning light circuit check.
5-1
The following warning
should come on for a few sec-
onds, then go off.
 Engine trouble warning light
 Coolant temperature warning
light
EAUU1950
ECA10251
5
lights
ECA15485