Denon AVC-X6500H Owner's Manual page 26

Contents Connections
u i o Q0
E HDMI connectors
Used to connect devices equipped with HDMI connectors.
"Connection 1 : TV equipped with an HDMI connector and
0
compatible with the ARC (Audio Return Channel) / eARC (Enhanced
Audio Return Channel)" (v p. 74)
"Connection 2 : TV equipped with an HDMI connector and
0
incompatible with the ARC (Audio Return Channel) / eARC
(Enhanced Audio Return Channel)" (v p. 76)
"Connecting a set-top box (Satellite tuner/cable TV)" (v p. 79)
0
"Connecting a DVD player or Blu-ray Disc player" (v p. 80)
0
"Connecting a Blu-ray Disc player compatible with the Denon Link
0
HD function" (v p. 81)
Front panel Display
Playback
t
Rear panel
Settings
F AC inlet (AC IN)
y
Used to connect the power cord. (v p. 89)
G SIGNAL GND terminal
Used to connect a ground wire for the turntable. (v p. 83)
H TRIGGER OUT jacks
Used to connect devices equipped with the trigger function.
(v p. 88)
I REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v p. 87)
J RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner's manual of the home
automation controller for more information about serial control of this
unit.
Perform the operation below beforehand.
A Turn on the power of this unit.
B Turn off the power of this unit from the external controller.
C Check that the unit is in the standby mode.
26
Remote
Tips Appendix
Index