Contents
Connections
GRelation between the "4K Signal Format" setting and supported
resolutionsH
Support
Color
Resolution
Space
4K 24p, 4K
RGB /
30p, 4K 25p
YCbCr 4:4:4
YCbCr 4:2:2 12 bit
4K 60p, 4K 50p YCbCr 4:2:0 8 bit
RGB /
YCbCr 4:4:4
YCbCr 4:2:2 12 bit
Front panel
Display
Playback
4K Signal Format
Pixel
Standard
Depth
Enhanced
(Default)
8 bit
P
10,12 bit
P
P
P
10,12 bit
P
8 bit
P
P
Rear panel
Settings
0 When setting this to "Enhanced", we recommend using a "Premium High
Speed HDMI Cable" or "Premium High Speed HDMI Cable with Ethernet" that
has an "HDMI Premium Certified Cable" label attached to the product
package.
0 When this setting is "Enhanced", configure the television or playback device
settings to match this setting.
P
0 When this setting is "Enhanced", video may not be output correctly depending
–
on the connected playback device or HDMI cable. In this case, change this
setting to "Standard".
P
0 "Custom" is displayed for the setting item if our service engineers or custom
P
installers has configured the HDMI signal format for this unit.
–
0 "4K Signal Format" can also be set by the following procedure. However, the
menu screen is not displayed. Watch the display while configuring the setting.
–
1. Press and hold the main unit's STATUS and ZONE3 SOURCE at the same
time for at least 3 seconds.
–
"zVideo Format <PAL>" appears on the display.
2. Use u or i on the main unit.
"4K Format:<Standard>" appears on the display.
3. Use the main unit's o or p and select the 4K Signal Format.
4. Press the main unit's ENTER to complete the setting.
194
Remote
Tips
Appendix
Index