Denon AVC-X6500H Owner's Manual page 228

Contents Connections
o Subwoofer
Set the presence of a subwoofer.
Yes
(Default):
No:
0 When "Speaker Config." - "Subwoofer" in the menu is set to "None", No is
automatically set. (v p. 218)
If the "Front" setting is "Small", the setting is automatically "Yes".
Front panel Display
Playback
Use a subwoofer.
Select when a subwoofer is not
connected.
Rear panel
Settings
o SW Mode
Select low range signals to be reproduced by subwoofer.
LFE
(Default):
LFE+Main:
0 This can be set when "2ch Playback" - "Subwoofer" is set to "Yes".
228
Remote
Tips Appendix
When "2ch Playback" - "Front" is set to
"Large", only LFE signals are output from
the subwoofer. Also, when "2ch
Playback" - "Front" is set to "Small", the
front channel low range signals are
added to the LFE signals and output from
the subwoofer.
The front channel low range signal is
added to the LFE signal output from the
subwoofer.
Index