Denon AVC-X6500H Owner's Manual page 211

Contents Connections
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey ® Setup.
If you add or remove a speaker after performing Audyssey
0
will no longer be able to select Audyssey MultEQ
Dynamic EQ or Audyssey Dynamic Volume
®
"Manual Setup" can be used without changing the settings. Please set if
0
necessary.
Front panel Display
Playback
Setup, you
®
XT32, Audyssey
®
. (v p. 176)
®
211
Rear panel
Settings
Amp Assign
Select the power amplifier usage method to match your speaker system.
o Assign Mode
Select how to use the power amp.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
11.1ch
(Default):
9.1ch + ZONE2:
Remote
Tips Appendix
Settings to assign all power amplifier
0
within this unit to MAIN ZONE to play
back up to 11.1-channels.
Setting to assign the power amplifiers in
0
this unit for ZONE2 to 2-channels.
You can connect speakers for up to 9.1-
0
channels for MAIN ZONE.
Index