Table of Contents
Advertisement
Contents
Connections
o Speakers for ZONE2 / Speakers for ZONE3 /
Speakers for ZONE2/3 / Speakers for Bi-Amp /
Speakers for 2ch / Speakers for Front B
When "Assign Mode" is set to "9.1ch + ZONE2", "9.1ch + ZONE3",
"9.1ch + ZONE2/3-MONO", "7.1ch + ZONE2/3", "9.1ch (Bi-Amp)" or
"9.1ch + Front B" in the menu, select the speaker terminal from which
to output the channels to which the internal amplifier is assigned.
(v p. 211)
HEIGHT 1:
HEIGHT 2
(Default):
SURROUND BACK:
Front panel
Display
Playback
The assigned channels are output from
the HEIGHT1 speaker terminals. The
height, ceiling, and Dolby Atmos Enabled
channels cannot be used.
The assigned channels are output from
the HEIGHT2 speaker terminals. Up to
one set of height, ceiling, and Dolby
Atmos Enabled channels can be used.
The assigned channels are output from
the SURROUND BACK speaker
terminals. The surround back channel
cannot be used.
Rear panel
Settings
o Floor
n Layout
Select the floor speakers location.
5ch & SB
(Default):
5ch ：
213
Remote
Tips
Appendix
This layout combines a surround back
speaker with the basic 5-channel layout.
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
Index
Advertisement
Table of Contents
