Technical Parameters - Unilever Pure it CU3040 Instruction Manual

EN
Process Flow Chart of Water Purification
Raw water Carbon filter
Inlet
Note:The above flow chart of water treatment is for reference only, and the real product shall prevail.
Filter Material Configuration
Filter name
Carbon filter Activated carbon
UF filter
UF filter Pure water
Outlet
Material Qty
1
Polysulfone 1
- 8 -

Technical Parameters

Product Name
Model
Ambient Temperature
Ambient Humidity
Applicable Water Source
Applicable Water Temperature
Working Pressure
Pure Water Flow Rate
Total Pure Water
* 1. For CU3040, under the test conditions of 0.1 MPa-0.4 MPa pressure for incoming tap water, 25±3 °C temperature,
continuous incoming tap water pressure less than 0-500 ppm, pH value between 6.5-8, SDI less than 5, turbidity less than 1.0
NTU, the service life for standard purified water is 3000 liters.
2. All parameters related to product performance are obtained under standard test conditions, which may be different due to
different use conditions in the actual process.
Recommended Replacement Cycle of key Parts
Part name
Carbon filter
UF filter
PVC soft tube
Filter life span is different from raw water temperature, pressure, quality and pure water consumption. Customer should replace
filters according to the actual conditions.
Countertop Ultrafiltration Water Purifier
CU3040
4 °C ~ 40 °C
≤90%
Municipal Tap Water
5 °C ~ 38 °C
0.1 MPa ~ 0.4 MPa
2 litre/minute
*3000 litres
Suggested replacement (month)
6
12
36
- 9 -
EN