Table of Contents
Advertisement
TECHNICAL PARAMETERS
Product Name
___________________________________________________________________
Model
___________________________________________________________________
Applicable Water Source
___________________________________________________________________
Feed Water Pressure
___________________________________________________________________
Max Working Pressure
___________________________________________________________________
Ambient Temperature
___________________________________________________________________
Ambient Humidity
___________________________________________________________________
Applicable Water Temperature
___________________________________________________________________
Rated Voltage
___________________________________________________________________
Rated Power
___________________________________________________________________
Filtered Water Flow Rate
20
Reverse Osmosis Water Purifier
UR5440
Municipal Tap Water
15 PSI ~ 60 PSI
100 PSI
39°F - 100°F (4°C - 38°C)
≤90%
41°F - 100°F (5°C - 38°C)
24 VDC
88 W
0.28 Gal/min*
PERFORMANCE DATA SHEET
The system has been tested according to NSF/ANSI Standard 58 for the reduction of TDS,
Cadmium, and Trivalent Chromium, as verified and substantiated by test data. The
concentration of the indicated substances in the water entering the system was reduced to a
concentration less than or equal to the permissible limit for the water leaving the system, as
specified by NSF/ANSI Standard 58. While testing was performed under standard laboratory
conditions, actual performance may vary.
Model name: UR5440
Daily Production Rate: 525 GPD
Replacement Filters: Composite Filter (FUR54PGP) / Carbon Block Filter (FUR54CTO) /
Reverse Osmosis Membrane Filter (FUR54RO)
Feed Water Pressure: 15 PSI ~ 60 PSI
Max Working Pressure: 100 PSI
Applicable Water Temperature: 41°F - 100°F (5°C - 38°C)
Ambient temperature: 39°F - 100°F (4°C - 38°C)
Rated voltage and power: 24 VDC, 88 W
Filtered water flow rate: 0.28 Gal/min
System dimension: 16.14 inches*5.51 inches*14.17 inches
System weight: 18.30 lbs
The RO membrane polymers or other components own best performance at pH 7~7.5, 15
PSI~60 PSI water pressure, 41°F - 100°F water temperature. Other environments may
affect performance.
Do not use with water that is microbiologically unsafe or of unknown quality without
adequate disinfection before or after the system.
This reverse osmosis system contains a replaceable treatment component critical for
effective reduction of contaminants and total dissolved solids. The product water shall be
tested periodically to verify that the system is performing properly.
94.7
92.3
91.7
21
Advertisement
Table of Contents
