Product Structure; Scope Of Application - Unilever Pure it CU3040 Instruction Manual

EN

Product Structure

1
2
3
4
5
6
(The picture is for reference only, and the real product shall prevail)
Filter Element Life Identification and Purchase
Carbon rod filter element (CTO carbon)
(Recommended replacement cycle: 6 months)
Note:The recommended replacement cycle is for reference only, and the specific replacement cycle is determined based on the
local water quality and water consumption of users.
1. Carbon filter
2. Top cover
13
3. Inlet faucet
4. PVC soft tube
5. Inlet fitting
12
6. Silica blocker
7. Output fitting
8. Adapter fitting
9. Foundation
10. Cover mounting
11
11. Filter cover
10
12. Output faucet
9
13. UF filter
8
7
UF membrane filter (UF membrane)
(Recommended replacement cycle: 1years)
- 6 -

Scope of Application

The machine is applicable to household and similar places.
Replacement of Filter Element
Filter life span depending on the local water quality & pure water production, replace it when it comes to the following
condition:
1) Purifier output reduces clearly or it tastes bad
2) Total quantity of pure water is reached or it comes to replacement cycle.
Filter replacement steps as below:
a. Screw the old filter anti-clockwise, as shown in pic.a
b. Remove the new filter protective film and aim it to the filter mounting seat, press it and screw it in clockwise. As
shown in pic.b
c. After filter is replaced, let it work for a while. Drink water till it's normally working.
(pic.a)
(The picture is for reference only, and the real product shall prevail)
When replacing the CTO filter, please follow the "Quick Start Guide" steps on the first page to carry out the
filter transposition, rinse and reset operations.
(pic.b)
- 7 -
EN