Operating; Adjusting The Volume; Temporarily Muting The Sound; Selecting An Input Signal - Hitachi CP-A100 User Manual – Operating Manual

Operating

Operating

Adjusting the volume

1.
Press VOLUME button on the remote control.
A dialog will appear on the screen to aid you in adjusting the volume.
2.
Use the ▲/▼ cursor buttons to adjust the volume.
To close the dialog and complete the operation, press the VOLUME
button again. Even if you do not do anything, the dialog will
automatically disappear after a few seconds.
● When is selected for current picture input port, the volume adjustment
is disable. Please see AUDIO item of SETUP Menu (37).

Temporarily muting the sound

1.
Press MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
To restore the sound, press the MUTE or VOLUME button. Even if you do
not do anything, the dialog will automatically disappear after a few seconds.
● When is selected for current picture input port, the sound is always
muted. Please see AUDIO item of SETUP Menu (37).
● When is selected to VIDEO, S-VIDEO or COMPONENT port, the
C.C. (Closed Caption) is automatically activated if the C.C. is set to
AUTO in the DISPLAY of the C.C. Menu and the input signal from the
port supports the C.C. feature (60).

Selecting an input signal

1.
Press INPUT button on the projector.
Each time you press the button, the projector switches its input
port from the current port as below.
COMPUTER IN 1  COMPUTER IN 2
VIDEO

● While TURN ON is selected for AUTO SEARCH item in OPTION
Menu (42), the projector will keep checking the ports in above order
repeatedly till an input signal is detected.
1.
Press COMPUTER button on the remote control.
Each time you press the button, the projector switches its input
port from the current port as below.
COMPUTER IN 1
● While TURN ON is selected for AUTO SEARCH item in OPTION
Menu, the projector will keep checking every port sequentially till an
input signal is detected (42). If COMPUTER button is pushed when
VIDEO, S-VIDEO or COMPONENT port is selected, the projector will
check COMPUTER IN1 port first.
(continued on next page)
8
S-VIDEO COMPONENT (Y, C

COMPUTER IN 2
/P , C /P )
B B R R
VOLUME button
VIDEO COMPUTER SEARCH
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON KEYSTONE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
▲/▼ button
MUTE button
VIDEO COMPUTER SEARCH
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON KEYSTONE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
INPUT button
INPUT
MENU
COMPUTER button
VIDEO COMPUTER SEARCH
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON KEYSTONE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET