Table of Contents
Advertisement
Recommended products
eni i-Ride PG 5W-40
Synthetic based lubricant for high-performance four-stroke engines.
JASO MA, MA2 - API SL - ACEA A3
Cleaningthevehicle
In order to soften the dirt and mud deposited on the painted surfaces, use a low pres-
sure jet of water. Once softened, mud and dirt must be removed with a soft sponge
for bodywork soaked in lots of water and "shampoo" (2-4% of car shampoo in water).
Then rinse abundantly with water, and dry with a shammy cloth. For the motor exterior
use petroleum, a brush and clean rags. Petroleum can damage paintwork. Remember
that any polishing with silicon wax must always be preceded by washing.
CAUTION
DETERGENTS POLLUTE WATER. THEREFORE THE VEHICLE SHOULD BE
WASHED IN AN AREA EQUIPPED FOR THE COLLECTION AND PURIFICATION
OF THE LIQUIDS USED.
WARNING
NEVER WASH THE VEHICLE UNDER DIRECT SUNLIGHT, ESPECIALLY IN SUM-
MER WHEN THE BODYWORK IS STILL HOT, AS THE CAR SHAMPOO MAY DRY
BEFORE BEING RINSED OFF, AND COULD DAMAGE THE PAINTWORK. NEVER
USE RAGS SOAKED IN PETROL OR DIESEL OIL TO CLEAN THE PAINTED OR
PLASTIC SURFACES, IN ORDER TO PREVENT THEM LOSING THEIR SHINE
AND MECHANICAL CHARACTERISTICS.
51
Advertisement
Table of Contents
