Preparation for Using your new TV
Connecting to A Computer
You can use your TV as a monitor/speakers for
interface and PC audio interface.
PC/NB
To speaker
Connecting to an antenna
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna
(not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna
must be used. The exact type and location of the antenna will depend on your particular area. Consult your
local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor
or indoor antenna is not needed. Connect the equipments as the following figure.
AU DIO
VIDEO EARPHONE PC AUDIO ANT 75
SCART2
SCART1
INPUT OUTPUT
OUT
INPUT
ANTENNA SOCKET
your computer by
Connect the devices as shown below.
To DVI
To VGA
Audio line
Y
Cb
Cr
VIDEO
Y
Pb
Pr
PC
DVI
Rs232
POWER
INPUT
ANT 75
connecting through its 15pin standard RGB
RGB line
PC AUDIO
INPUT
Plug(not supplied)
Adaptor (not supplied)
Loosen the screw
- 5 -
COAXIAL CABLE (75W )
TWIN-LEAD FEEDER(300 W )
Insert the feeder in
Tighten the screw
The signal comes from:
An outdoor antenna
An indoor antenna
CATV net