OSD Language Settings Using the GENERAL SETTINGS menu When you start using your set for the first time, you may need to select the language that you want to use. OSD LANGUAGE 1) Press the <Menu> button to enter the main menu. 2) Press the <...
WELCOME TO THE BRIGHT Dear customer, Thank you for purchasing this Plasma Display TV. We wish you many years of viewing pleasure. The goal of this manual is to guide you through setting up and operating your TV as quickly as possible.
When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot. To avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on the power cord.
Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV.
Remote Sensing Window AC Power Outlet Connecting your TV Caution: Do not plug the TV in until you have finished connecting all of your equipment. Connecting to A/V equipments To enjoy its multimedia features, you can connect your receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control.
To VGA Connecting to an antenna To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used.
Using the remote control Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment.
Using the remote control Learning about the remote control Recall P.Mode S.Mode Sub.Code Still Zoom Index Hold S-Video Video Cancel YPbPr Power : Power on/off Channel Number :Direct channel selction Red/PIP : Fast text/ Select the OFF/PIP/POP Mode Sub.Ch. Green/Sub.Ch.: Fast text / Select Sub.
If you can not find your remote control immediately, do not worry ,the other way for your selecting signal source. Please Push the <TV/AV> Key on the front control board , a Source OSD Menu will display on the screen. Push the <Chanel up>...
Page 11
When you changing the channel, the sound state, colour system state& sound system state graphics can be displayed below the channel number. There are 3 sound states in this TV. If the sound is mono, the graphics , If the sound is stereo, the graphics is colour system state &...
Using the TV features Using the CHANNEL menu CHANNEL NUM 1) Press the <Menu> button to enter the main menu. button to select the item CHANNEL. 2) Press the < VOL+> or <VOL-> button to select CHANNEL NUM. 3) Press the <...
Using the TV features Using the PICTURE menu PROGRAM Adjust picture settings 1) Press the <Menu> button to enter the main menu. 2) Press the < VOL+> or< VOL-> button to select the item PICTURE PARAMETERS. 3) Press the <...
<Main Ch.>button ,the BLUE button, this button is for switching the Main Picture source. Note:1)WhenMainpicture is TV/SCART1/SCART2/VIDEO,the Sub Picture is YPbPr/PC/DVI. 2)WhenMainpicture is YPbPr/PC/DVI,the Sub Picture is TV/ SCART1/SCART2/VIDEO. Using the SLEEP menu After setting SLEEP TIME ,your set will come into Stand-by mode automatically when sleep time is over.
Using the TV features Using the GENERAL SETTINGS menu OSD POSITION 1) Press the <Memu> button to enter the main menu. 2) Press the < VOL+> or <VOL-> button to select the item GENERAL SETTINGS. button to select OSD POSITION 3) Press the <...
When a page is selected in Teletext mode it may take some time before it becomes available. Press the <Cancel> button to switch to the TV mode. When the required page is found, the page number will appear at the top of the TV picture. Press the <Cancel> button to return to the selected Teletext page.
2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause damage to the TV.