Using The Pip Menu; Using The Sleep Menu - Hisense PDP4212 User Manual

Using the TV features

Using the PIP menu

Select PIP SIZE
1)Press the <Menu> button to enter the main menu ,
2)Press the < VOL+> or <VOL->
3)Press the < CH+> or <CH->
button to enter the PIP SIZE,
4)Press the < VOL+>
5)Press the <CH+> or <CH-> button ,you can select one mode
from among the OFF, PIP and PBP.
6)Press the <Menu> button to go back to the previous level.
Adjust PIP Picture
When PIP SIZE is set at PIP or POP mode, the item PIP BRIGHTNESS and PIP CONTRAST are active.
1)Press the < CH+> or <CH->
2)Press the < VOL+>or <VOL->
The adjusted data is memorized automatically .
Adjust PIP Position
When PIP SIZE is set at PIP mode, the item PIP POSITION is active.
1)Press the < CH+> or <CH->
2)Press the < VOL+>or <VOL->
The adjusted data is memorized automatically.
Multiplex Button for PIP
There are four multiplex buttons on the remote control for PIP operation .They are:
<PIP> button ,the RED button ,this button is for selecting one mode from among the OFF, PIP and PDP.
<Sub.Ch.> button, the GREEN button , this button is for switching the Sub Picture source.
<Swap> button, the YELLOW button, this button is for swapping the source between the Main Picture and Sub. Picture
<Main Ch.>button ,the BLUE button, this button is for switching the Main Picture source.
Note:1)WhenMainpicture is TV/SCART1/SCART2/VIDEO,the Sub Picture is YPbPr/PC/DVI.
2)WhenMainpicture is YPbPr/PC/DVI,the Sub Picture is TV/ SCART1/SCART2/VIDEO.

Using the SLEEP menu

After setting SLEEP TIME ,your set will come into Stand-by
mode automatically when sleep time is over.
1)Press the <Menu> button to enter the main menu ,
2)Press the < VOL+> or <VOL->
3)Press the < CH+> or <CH->
button to operate SET TIMER,
4)Press the < VOL+>
The maximum sleep time you can set is 120 minutes.
6)Press the <Menu> button to go back to the previous level.
7)Press the <Time> button on the remote control , you will enter the SLEEP menu directly .
select the PICTURE IN PICTURE.
to
button to select the PIP SIZE,
button to select the item you want to adjust.
button to adjust the level.
button to select the PIP POSITION.
button to adjust the position of the PIP window.
select the SLEEP
to
button to select the SLEEP TIME
PICTURE IN PICTURE
PIP POSITION
PIPSIZE
PIP BRIGHTNESS
PIP CONTRAST
SLEEP
SLEEP TIME
SET TIMER
TIME REMAIN
-12-
OFF
PIP
POP
100
60